PN 177196BB8 of 8
TRAINING CHECKLIST
CHECKLIST
Flagging Sets Setup
B Default
B Edited/Created
Comments:
_____________________________________________________________________________
_____________________________________________________________________________
_____________________________________________________________________________
USING THE ONLINE HELP/INSTRUCTIONS FOR USE MANUAL
Locate and review the following procedures or sections in the documentation:
B Power Up
B Power Down
B Startup
B Shutdown
B Running Cell Controls
B Running Manual (STAT) Mode Samples
B Running Autoloader Mode Samples
B Calibration
B Maintenance
B Setup
PAPERWORK
B Review the installation report with the customer and ensure it includes a copy of the
control results.
B Discuss the purpose and importance of documenting daily procedures, controls,
reagents, and maintenance.
B Complete this Training Checklist. Place the original in the Laboratory Log book. The
Beckman Coulter Representative should Fax a copy of the signed training checklist to:
Miami Education Center (305) 380-5022.
B Complete a Training Checklist for each operator trained on the instrument.
B Ensure the customer service telephone number is clearly noted.
B Attach a copy of the Setup Report to this checklist.
Comments:
_____________________________________________________________________________
_____________________________________________________________________________
_____________________________________________________________________________
________________________________________ ________________________________________
Trainee Signature Trainer Signature