PN 177196BB
1-22
GETTING TO KNOW YOUR INSTRUMENT
REAGENTS AND INSTRUMENT WASTE
a. If the waste container is ready for replacement, have the trainee use this procedure
to replace the container.
b. Make sure the trainee continues the procedure to the end, which includes doing the
Neutralizing the Waste and Treating for Biohazards procedure under Heading 11.4, WASTE
HANDLING PROCEDURES.
c. Walk the trainee through the waste procedure if the waste does not need to be
changed.
5. If the laboratory plans to use a waste container, give the trainee a copy of the
WASTE
CONTAINER REPLACEMENT
page from this Training Guide and review the procedure.
To Next Page
Loading...
