Beckman Coulter COULTER ACT 5diff User Manual

PN 177196BB
3-4
SETUP OPTIONS
MISCELLANEOUS (OPERATIONAL) SETUP OPTIONS
2) Whenever a XB/XM Failed message (alarm) is triggered, you can elect to stop
analysis of patient samples (
Stop instrument on “XB/XM Failed” message).
h. Auto-Stop for Consecutive Results
1) The Auto-Stop for Consecutive Results feature allows you to select the number
of consecutive results with certain characteristics that, if they occur,
automatically stop the instrument.
2) You can select from one to five consecutive results for one or more of the
following characteristics:
3) A voteout indicates that when the two values derived for the analysis were
compared, the difference exceeded a predetermined limit.
4) A DIFF+/DIFF- indicates that when the WBC count derived in the flow cell was
compared to the WBC count derived in the WBC/BASO bath, the difference
exceeded a predetermined limit.
4. Click the
Locations/Physicians tab.
a. The Locations/Physicians screen allows you to add patient locations and physicians’
names to the database, to edit them, and to delete them from the database.
b. Point out the four fields on the left side of the screen.
1) The Location field allows you to enter a new location or edit a current location.
2) The next two fields are filled in automatically by the instrument.
3) The box on the bottom displays the locations currently in the database.
c. Point out the four fields on the right side of the screen.
1) The Physician field allows you to enter a new location or edit a current
physician’s name.
2) The next two fields are filled in automatically by the instrument.
3) The box on the bottom displays the physician names currently in the database.
d. Help the trainee find the procedure,
Adding/Editing Physician and/or Location, in
Appendix
A.4 of the Online Help System or the Instructions for Use manual, and let
them use the procedure to add locations and physicians’ names to the database.
5. Click the
Units tab.
a. The Units screen allows you to select the format for reporting the numeric results.
b.
US is the default setting.
c. The formats of each of the available Reporting Unit is shown in Table
A.3 in the
Online Help System or the Instructions for Use manual.
r MCHC >38 r WBC = 0
r WBC Voteout r RBC = 0
r RBC Voteout r HCT = 0
r HGB Voteout r PLT = 0
r HCT Voteout
r PLT Voteout
r DIFF+/DIFF-

Beckman Coulter COULTER ACT 5diff Specifications

General

Brand	Beckman Coulter
Model	COULTER ACT 5diff
Category	Laboratory Equipment
Language	English