2. Technical Specifications
2-8
ENVIRONMENTAL
Operating Temperature 10ºC to 32ºC (50ºF to 90ºF)
Storage Temperature -15ºC to 40ºC
Relative Humidity
10% to 90%
Pressure
49 to103 kPa
Shock and Vibration
Meet MIL STD.810E method 514.4 (Basic
Transportation)
Electromagnetic
Compliance
Meet EN60601-1-2 (2007) and IEC 60601-1-2 (2007)
OPERATING
PARAMETERS
Flow Rate
10-750 ml/min, with 1000 ml/min option, in 10 ml/min
steps plus 2.5 and 5.0 ml/min with fluids of viscosity
1 to 8 centipoise (Water and crystalloid fluids through
packed red cells)
Tolerance: ± 10% from 20 - 1000 ml/min
± 25% for 2.5, 5.0,10 ml/min
Output Temperature
Set to 37.5ºC for flow ≥ 60 ml/min, to 39ºC at
50ml/min or lower.
Heating Capacity
Min. 1400 watts to fluid (20ºC temperature rise at
1000 ml/min)
Line Pressure 0 - 300 mmHg, via pressure transducer
Operating Modes
a) Load disposable set
b) Prime system
c) Prime patient line
d) Infuse at operator controlled rate with warming
e) Infuse fixed volume bolus with warming
f) Stop system
To Next Page
Loading...
