CARE AND MAINTENANCE
Chair Surface Cleaning and Disinfection
• The surface of the chair’s seating area is made of synthetic leather. Apply dry wiping, wipe the surface with wet cloth
or moistened with a 10% detergent solution diluted using water. In case the synthetic leather is wiped with a wet
cloth, fully wipe off the moisture with dry cloth.
• If the color of clothing or belt remained on the synthetic leather, wipe it off with cloth moistened with a 10%
detergent solution diluted using water as soon as possible, to avoid penetration caused by plasticizer.
• In case the synthetic leather is wiped with a wet cloth, fully wipe off the moisture. If it remains, hydrolytic
degradation may be accelerated. Do not use solvent and bleach.
• Use FD366 made by Durr for cleaning and disinfection of the product exterior.
• Apply dry wiping using a dry and soft cloth to metallic and resin cover areas.
53
1
Chair Section
1. If there is stains, wipe clean as quickly as possible with a 10% detergent solution diluted using
water to prevent permanent staining and fully wipe off the moisture with dry and soft cloth.
2. Do not place any hard and heavy article or any article having a sharp tip or edge on the chair’s
seating area. The synthetic leather may be damaged otherwise.
3. For cleaning the resin cover, do not use cleaning agents containing solvent or abrasives, thinners
or oil-based alcohol (butanol and isopropyl alcohol), which may cause cracks.
4. If any metallic area is wetted, wipe off the moisture as soon as possible. They may facilitate rust
generation.
CAUTION
To Next Page