CARE AND MAINTENANCE
56
Assistant control panel
Do NOT spray directly
Do NOT spray directly
•
In case the surface of the assistant control panel is
wiped with disinfectant agent or the like, fully wipe
away the chemical. Control panel malfunction
may arise if the chemical penetrates to the back face
of the assistant control panel.
•
Do not spray liquids directly onto unit surfaces,
holder and operation panel. In order to prevent
damage to electrical components and system.
• Use FD333 or FD366 made by Durr or ethanol as sprayed
to a soft cloth for cleaning and disinfection. Wipe off with
dry soft cloth to dried up of the assistant control panel.
Assistant Instrument holder
• Use FD333 or FD366 made by Durr or ethanol as sprayed
to a soft cloth for cleaning and disinfection. Wipe off with
dry soft cloth to dried up of the assistant instrument holder.
3
Cuspidor Unit Section
Do not spray liquids directly onto unit surfaces,
holder and operation panel. In order to prevent
damage to electrical components and system.
CAUTION
To Next Page