Name: Bentel Security KYO 4 M
Brand: Bentel Security
Rating: 5 (1 reviews)

To Next Page

To Previous Page

®®

Section 3 - Programming from PC

Cycles

This parameter determines the number of times the zone will signal the ‘Zone

Alarm’ event.

z Repetitive (RP) - Zones with this attribute will generate the ‘Zone Alarm’

event for an unlimited number of times.

z Cycles (Cycles) - The required number of Alarm cycles (0 through 14) can

be programmed in this field. If zero (0) is programmed, the zone will be

unable to generate Zone Alarm event.

NOTE: Zones that signal persistent Alarm status (e.g. due to Trouble) will

generate One Alarm Cycle Only.

Double Pulse

This section describes how to program the Double Pulse time (0 to 250 seconds).

Partitions

This section will allow you to assign the Zones to the Partitions. The Zone will be

able to generate Alarm events only when all its Partitions are armed.

Other manuals for Bentel Security KYO 4 M

Questions and Answers:

Need help?

Do you have a question about the Bentel Security KYO 4 M and is the answer not in the manual?

General