Bentel Security KYO 4 M Installation Manual

76 Multifunction Control Panel
®®
 For Future Use (54)
 (Kyo4/8/32) - For Future Use (55)
 (Kyo16D) - Enable tamper for BPI Device or Receiver missing (55) -
When this option is enabled, the Control panel generate a tamper alarm for
the BPI device missing or Wireless Receiver missing event. When this op-
tion is disabled, the control panel log these events only.
The CEI 79-2 approval applies only when the "Enable tamper for BPI Device
or Receiver missing" is ENABLED.
 For Future Use (56 - 63)
Auto-Reset Memory
This section will allow you to select the Partitions that will reset their Alarm
memories automatically on Arming.

Bentel Security KYO 4 M Specifications

General

Brand	Bentel Security
Model	KYO 4 M
Category	Control Unit
Language	English