125
Troubleshooting
The sewing computer must be
cleaned/lubricated
⦁
when this message appears, the sewing computer must be
cleaned/lubricated. This ensures proper functioning and a
long operational life span of the sewing computer
It is time for the regular maintenance.
Please contact your BERNINA dealer
or your BERNINA service address
⦁
the sewing computer must be taken to an authorised
BERNINA dealer/servicing shop. The announcement appears
after completing the programmed service interval. The
message can be deleted temporarily by touching the field
«ESC» but will reappear when the sewing computer is next
restarted.
Having cleared the announcement via the «ESC» three times,
the announcement will appear as recently as the next service
interval has been completed.
Having your sewing computer cleaned and serviced properly
at the appropriate times ensures its proper functioning and
long service life. Failure to do so may adversely affect service
life and limit the guarantee. The charge for servicing is
nationally regulated – consult your dealer or servicing shop
for details
General Explanation Repair
Messages
033805.51.04_2014-02_Manual_B710_EN
To Next Page
Loading...
