Bernina Kaffe 770 QE PLUS - Programming the Heirloom Buttonhole; Sewing the Manual 7-Step Buttonhole with the Buttonhole Foot #3 C

Buttonholes
117
9.11 Programming the Heirloom buttonhole
Prerequisite:
• The Buttonhole Foot with Slide#3A is fitted.
> Tap «Buttonholes».
> Select Heirloom buttonholeNo.63.
> Sew the required length of the buttonhole.
> To program the length, push the button «Quick Reverse».
– The machine finishes the buttonhole automatically. All subsequent buttonholes are sewn at the same
length.
9.12 Sewing the manual 7-step buttonhole with the Buttonhole Foot#3C
The length of the beads is manually determined when sewing. Bartack, eye and securing stitches are
preprogrammed. The individual steps can also be selected by scrolling via the arrow icons or by pushing the
button. «Quick Reverse»
Prerequisite:
• The Buttonhole Foot#3C is fitted.
> Tap «Buttonholes».
> Select Standard buttonholeNo.51.
> Tap «i-Dialog».
man
> Tap «Manual Length Adjustment».
– Step 1 is activated in the display for the start of the buttonhole.
> Sew the required length of the buttonhole.
– Step 2 is activated.
> Stop when the required length of the buttonhole or length marking is reached.
> Step3 appears by tapping «Scroll down».
– The machine sews straight stitches in reverse.
> Stop at the height of the first stitch at the start of the buttonhole.
> Step4 appears by tapping «Scroll down».
– The machine sews the upper bartack and stops automatically.
> Step5 appears by tapping «Scroll down».
– The machine sews the second bead.
> Stop the machine at the level of the last stitch of the first bead.