Bernina Kaffe 770 QE PLUS - Sewing the Manual 5-Step Buttonhole with the Buttonhole Foot #3 C

Buttonholes
118
> Step6 appears by tapping «Scroll down».
– The machine sews the lower bartack and stops automatically.
> Step7 appears by tapping «Scroll down».
– The machine secures and stops automatically.
9.13 Sewing the manual 5-step buttonhole with the Buttonhole Foot#3C
The length of the beads is manually determined when sewing. Bartack, eye and securing stitches are
preprogrammed. The individual steps can also be selected by scrolling via the arrow icons or by pushing the
button. «Quick Reverse»
Prerequisite:
• The Buttonhole Foot#3C is fitted.
> Tap «Buttonholes».
> Select Round buttonhole with normal bartackNo.54.
> Tap «i-Dialog».
man
> Tap «Manual Length Adjustment».
– Step 1 is activated in the display for the start of the buttonhole.
> Sew the required length of the buttonhole.
– Step 2 is activated.
> Stop when the required length of the bead or length marking is reached.
> Step3 appears by tapping «Scroll down».
> The machine sews the curve or eye and stops automatically.
> Step 4 appears by tapping «Scroll down».
– The machine sews the second bead in reverse.
> Stop the machine at the level of the first stitch at the beginning of the buttonhole.
> Step5 appears by tapping «Scroll down».
– The machine sews the upper bartack and secures automatically.