EasyManua.ls Logo

Bernina Kaffe 770 QE PLUS - Edgestitching Using the Seam Guide; Sewing Hem Edges

Bernina Kaffe 770 QE PLUS
236 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Practical stitches
95
> Select the needle position at the desired distance to the edge.
5/
8
5
/
85/
8
25 15 1
5
1
5
75
75
6.15 Edgestitching using the seam guide
When sewing parallel wider lines, it is recommended to guide the seam guide along the sewn of lines.
> Fit the Reverse Pattern Foot#1C.
> Tap «Practical Stitches».
> Select Straight stitchNo.1.
> Loosen the screw on the back of the presser foot.
> Insert the seam guide into the hole in the presser foot.
> Adjust the width as required.
> Tighten the screw.
> Guide the folded edge along the seam guide.
5/8
5/8
5
/8
1
25 15 15
15
75
75
6.16 Sewing hem edges
When using the Blindstitch Foot#5, it is recommended to set the needle position far left or far right. With
the Reverse Pattern Foot#1C and the Edgestitch Foot#10/10C/10D, all needle positions are possible.
> Fit the Blindstitch Foot#5 or the Reverse Pattern Foot#1C or the Edgestitch Foot#10/10C/10D.
> Tap «Practical Stitches».
> Select Straight stitchNo.1.
> Place the inside upper edge right against the guide for the Blindstitch foot.

Table of Contents

Related product manuals