Bernina Kaffe 770 QE PLUS - Deleting Motifs on the BERNINA USB Stick; Calibrating the Buttonhole Foot #3 A

Setup Program
61
> Tap «Factory Setting».
> To delete all data from the Personal Memory, tap «Delete data from own storage medium» and confirm.
> To delete all embroidery motifs from the Personal Memory, tap «Delete personal embroidery motifs» and
confirm.
Deleting motifs on the BERNINA USB Stick
When motifs which won't be needed anymore are saved on the BERNINA USB Stick, the stick can be
connected to the machine and the data can be deleted.
> Insert the BERNINA USB stick into the USB Port of the machine.
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Factory Setting».
> Tap «Deleting USB Stick» and confirm.
Calibrating the Buttonhole Foot #3A
The Buttonhole Foot with Slide#3A is calibrated to the machine and they should only be used both together.
Prerequisite:
• The Buttonhole Foot with Slide#3A is fitted.
• The needle is not threaded.
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Maintenance/Updates».
> Tap «Calibrating the Buttonhole foot#3A».
> To start the calibration, push the «Start/Stop» button.