Creative embroidering
156
> To confirm the changed position, tap «Save Position».
– The point changes color and is set.
> Select the second positioning point of the embroidery motif.
> Turn the «Upper Multifunctional knob» or the «Lower Multifunctional knob» to the left or to the right to
position the needle above the respective mark on the fabric.
> To confirm the changed position, tap «Save Position».
– The point changes color and is set. The embroidery motif is adjusted accordingly.
> To reset the changes and revert to the default settings, tap «Reset Pinpoint Placement».
Free point positioning
This function allows the exact positioning of the embroidery motif on the fabric in an easy way. The points
can be defined as you like within the embroidery motif.
Prerequisite:
• Any two points of the embroidery motif are marked with chalk or a water-soluble pen on the fabric. The
place or the location where the embroidery motif is to be positioned is clearly visible.
> Select an embroidery motif.
> Tap «i-Dialog».
> Tap «Pinpoint Placement».
> Tap «Free Point Positioning».
> To prevent the size of the embroidery motif from being changed when positioning the points, tap «Scale
the Size of Embroidery Motif».
> Define a desired point within the embroidery motif.
– The positioning point is displayed.
> Turn the «Upper Multifunctional knob» or the «Lower Multifunctional knob» to the left or to the right to
position the needle above the respective mark on the fabric.
> To confirm the changed position, tap «Save Position».
– The point changes color and is set.
> Select the second positioning point of the embroidery motif.
To Next Page
Loading...
