Sewing preparation
48
> To insert the bobbin case into the machine, hold it so that the thread guide(5) points upwards.
> Insert the bobbin case.
> Press onto the center of the bobbin case until it engages.
> Pull the thread through the thread cutter(6) and cut.
> Close the Looper Cover.
Indicating fill level of bobbin thread
When the fill level of the bobbin thread is low, an animation appears in the icon «Bobbin Thread» to indicate
that the bobbin thread is about to run out.
> To thread the bobbin thread according to the animation, tap, «Bobbin Thread».
To Next Page
Loading...
