Bernina Kaffe 770 QE PLUS - Correcting the Balance; Programming Pattern Repeat; Programming Long Stitch

Creative sewing
70
Correcting the balance
Different fabrics, threads and stabilizers can affect the programmed stitch patterns so that they cannot be
sewn out correctly. The electronic balance can correct these deviation and the stitch pattern can be adjusted
optimally to the selected fabric.
> Select a stitch pattern or alphabet.
> Sewing stitch pattern.
> Tap «i-Dialog».
> Tap «Balance».
– A preview of the stitch pattern is displayed.
> To correct the longitudinal direction of the stitch pattern, turn the «Lower Multi-function knob» until the
preview of the stitch pattern matches the stitch pattern sewn on the fabric.
> Altered Balance settings can be saved for each stitch in the «Personal Memory» .
> Altered Balance settings only remain valid until the «Clear Settings» is pushed or the machine is switched
off.
Programming pattern repeat
Stitch patterns can be repeated up to 99 times.
> Select a stitch pattern or alphabet.
> Tap «i-Dialog».
x
> Tap «Pattern Repeat».
> Enter the required number of stitch patterns.
> Tap «Confirm».
Programming long stitch
The maximum length for long stitches is 12 mm and the machine sews every second stitch.
> Select a stitch pattern.
> Tap «i-Dialog».