Sewing preparation
33
Switching the machine on
> Set the Power Switch to «I».
2.4 Foot control
Regulating the speed via the foot control
Via the foot control the speed can be adjusted infinitely variable.
> Press the foot control down carefully to start the machine.
> To sew faster, press the foot control harder.
> Release the foot control to stop the machine.
Activate/deactivate additional function
The Foot Control can be programmed with a second function that can be activated and deactivated by a
Back-kick. On delivery, the Back-kick is programmed with the function «Needle Up/Down».
> To raise or lower the needle, press the Foot Control downward with your heel.
The Back-kick function can be programmed individually. (see page52)
To Next Page
Loading...
