Bernina Kaffe 770 QE PLUS - Programming the Button Quick Reverse; Programming the Button Securing; Programming the Foot Control

Setup Program
52
Programming the button «Quick reverse»
You can choose between «Reverse sewing» and «Stitch-specific reverse sewing».
> Tap «Setup Program».
> Tap «Sewing settings».
> Tap «Programming buttons and icons».
> Tap «Programming the button Quick reverse».
> To set the stitch-precise reverse sewing, tap «Backstepping».
> To set the stitch-precise reverse sewing, tap «Permanent Quick Reverse».
Programming the button «Securing»
The number and type of securing stitches can be programmed.
> Tap «Setup Program».
> Tap «Sewing settings».
> Tap «Programming buttons and icons».
> Tap «Programming the button Securing».
> To program subsequent securing stitches, tap «Securing stitches in close succession».
> To program the number of securing stitches, tap «Minus» or «Plus».
> To program 4 securing stitches in place, tap «Securing stitches in place».
Programming the foot control
When the icon «Needle up/down» is activated, the needle is raised or lowered via the Back-kick.
Alternatively, the presser foot position, the thread cut and the automatic securing can be programmed.