Errors and faults
179
Message on the display Cause Solution
The hoop is not attached. > Attach the hoop.
The hoop is attached. > Remove the embroidery hoop.
The movement of the hoop
follows.
> Tap «Confirm».
The embroidery motif is partly
outside the hoop.
> Reposition the embroidery motif and start embroidering
it again.
The embroidery motif is too
large.
> Reduce the size of the embroidery motif.
> Attach a larger hoop.
Insufficient free space on the
BERNINA USB stick (optional
accessory).
There is not enough free capacity
on the BERNINA USB stick
(optional accessory).
> Make sure that the BERNINA USB stick (optional
accessory) is used.
> Delete data from the BERNINA USB stick (optional
accessory).
No personal data on the
BERNINA USB stick (optional
accessory).
No personal data for recovery
available on the BERNINA USB
stick (optional accessory).
> Make sure that the data and settings have been saved
on the BERNINA USB stick (optional accessory).
The recovery of personal data has
failed.
The firmware update has been
successful but the personal data
could not be recovered.
> Make sure that the data and settings have been saved
on the BERNINA USB stick (optional accessory).
> Transfer saved data to the machine.
To Next Page
Loading...
