Electric Actuator ICON2000/ICON2000AD
ADDENDUM A to INSTRUCTION HANDBOOK MAN 618
© Copyright by BIFFI Italia. All right reserved. Page
INDEX
1 SAFETY INSTRUCTIONS 2
1.1 General 2
1.2 Identification of main parts 3
2 CHECK FOR RIGHT APLICATION 4
2.1 Marking 5
3 APPLICABLE GENERAL STANDARDS AND REGULATIONS 6
4 TERMS AND CONDITIONS 6
5 MANUFACTURER’S LIABILITY 6
6 STORAGE AND PRE-INSTALLATION 7
6.1 Storage procedure 7
6.2 Checks to be performed before installation 7
7 INSTALLATION 8
7.1 Working condition 8
7.1.1 Models ICON-040 and ICON-050 8
7.1.2 Base unit with extensions [A] or [B] or [C] 8
7.2 Identification of entry 9
7.2.1 Base actuator 9
7.2.2 Base actuator with extension [A] on the control compartment 10
7.2.3 Base actuator with extensions [B] or [C] on the terminal board
compartment 11
7.3 Wiring 12
7.4 Cable connection 12
7.5 Installation in ambient with explosive dusts 13
8 MAINTENANCE 14
8.1 Periodic Inspections 14
8.2 Dismantling and Reassembling 15
8.3 Repairs 16
To Next Page
