Electric Actuator ICON2000/ICON2000AD
ADDENDUM E to INSTRUCTION HANDBOOK MAN 618
© Copyright by BIFFI Italia. All right reserved. Page
7.5 Installation in ambient with explosive dusts
Special attention must do to these following points:
before the assembly the joint surfaces must be greased with Aeroshell
grease.
the cable glands must have a protection degree at minimum IP66 or IP68
(15m depth / 90 hours) according to IEC/EN 60529 standard.
periodically verify the quantity of dust deposited on the enclosure and
clean it in the case the quantity becoming more than 5 mm.
To Next Page
Loading...
