Electric Actuator ICON2000/ICON2000AD
ADDENDUM G to INSTRUCTION HANDBOOK MAN 618
© Copyright by BIFFI Italia. All right reserved. Page
11
7 INSTALLATION
Important
The installation must be carried out in accordance to
the applicable standards IEC/EN 60079-14 and
IEC/EN 60079-17 regarding the electrical installations
in Hazardous Areas (other than mines) classified as
Zones 1, 2 (gas) and Zones 21, 22 (dust) following
IEC/EN 60079-10-1 and IEC/EN 60079-10-2 and any
other applicable national standards and rules.
7.1 Working condition
Warning
For the correct utilisation with respect to the safety
and the functionality of the enclosures components,
check the "temperature ambient range" embossed on
the nameplate.
7.1.1 Models ICON-040 and ICON-050
from -25°C to +60°C (from -13°F to +140°F)
7.1.2 Base unit with extensions [A] or [B] or [C]
When on the foreseen extension is installed in an ICON2000/ICON2000AD
unit the whole assembly is suitable for the following ambient temperatures:
from -25°C to +60°C (from -13°F to +140°F)
for all models the maximum permissible temperature is depending from the
type of motor (SM or TM) installed on the base ICON2000/ICON2000AD
unit.
To Next Page
Loading...
