BIFFI ICON 2000 - Page 262

“ICON 2000v4"
instruction and operating manual
© Copyright by BIFFI Italia. All right reserved. Section 618/42 Page 31
Contents may change without notice
ExtUserPrmData=13 "Dead band"
Unsigned8 10 1-255
EndExtUserPrmData
ExtUserPrmData=14 "Motion Inhibit"
Unsigned8 6 1-255
EndExtUserPrmData
;
; Unit definition list:
;
GSD_Revision=4
;
Vendor_Name="BIFFI ITALIA srl"
Model_Name="ICON2000v4 DPv1"
Revision="Release 4.0"
Ident_Number=0x0937
Protocol_Ident=0
Station_Type=0
Hardware_Release="Hardware Release DE5706 rev.0.1"
Software_Release="Software Release SW=4.01"
;
9.6_supp=1
19.2_supp=1
45.45_supp=1
93.75_supp=1
187.5_supp=1
500_supp=1
1.5M_supp=1
;
MaxTsdr_9.6=60
MaxTsdr_19.2=60
MaxTsdr_45.45=60
MaxTsdr_93.75=60
MaxTsdr_187.5=60
MaxTsdr_500=100
MaxTsdr_1.5M=150
;
Implementation_Type="SPC3"
Bitmap_Device="IC0937_R"
Bitmap_Diag="IC0937_D"
Bitmap_SF="IC0937_C"
;
; Slave-Specification:
;
Freeze_Mode_supp=1
Sync_Mode_supp=1
Auto_Baud_supp=1
Set_Slave_Add_supp=0
Min_Slave_Intervall=1
Max_Diag_Data_Len=16
Slave_Family=0
Fail_Safe=1
;
; UserPrmData: Length and Preset:
;
User_Prm_Data_Len=20
User_Prm_Data=0x00,0x00,0x00,\ ;Reserved DPV1
0x00, \ ;3- Storage Format
0x00, \ ;4 -Fail Safe action
0x0a, \ ;5 -Delay before Fail Safe
0x32, \ ;6 -Safe position
0x00, \ ;7 -Timer OP
0x0a, \ ;8 -Timer on time
0x05, \ ;9 -Timer off time
0x5a, \ ;10-Timer start pos
0x64, \ ;11-Timer stop pos
0x00, \ ;12-Timer CL
0x02, \ ;13-Timer on time
0x01, \ ;14-Timer off time
0x0a, \ ;15-Timer start pos
0x00, \ ;16-Timer stop pos
0x00, \ ;17-Reserved
0x0f, \ ;18-Dead band
0x05 ;19-Motion Inhibit
;
Max_User_Prm_Data_Len=20
;
Ext_User_Prm_Data_Const(0)=0