Blackmagicdesign Videohub User Manual

Using Blackmagic Videohub Control
7
Menus and Buttons Explained
Settings Menu
Select Videohub
Select from a list of Videohubs that are currently connected to your network.
Save Layout
Save customized pushbutton layouts for the different environments in which you use your Videohub.
Load Layout
Load previously saved pushbutton layouts.
Edit Buttons
Displays the Edit Buttons for editing the pushbuttons.
Reset All
Displays all of the inputs and outputs of the connected Videohub and replaces customized icons with
the default icon. Source, destination and deck control settings are maintained.
Edit Buttons
Add
Add a source or destination pushbutton.
Edit
Allows you to set the SDI source or destination, deck control and the icon for the selected pushbutton.
Lock and Unlock
Lock a destination to avoid accidentally changing the video source which is routed to that destination.
If you click on a pushbutton that's locked, the Lock button changes into an Unlock button. Simply click
the Unlock button to unlock the destination pushbutton.
Clear
Deletes source, destination and deck control settings as well as the icon for the selected pushbutton.
Remove
Removes the selected pushbutton.
Done
Click the Done button to exit the edit mode.
Click Edit Buttons to display the above buttons.
Click the Settings button to display the above menu.

Blackmagicdesign Videohub Specifications

General

Video Input	SDI
Video Output	SDI
Serial Router Control	RS-422
Ethernet Router Control	10/100/1000 Ethernet
Inputs	40
Outputs	40
SDI Bit Depth	10-bit
Power Supply	Internal power supply, 100-240V AC