50
Controlling Videohub with Software
Blackmagic Videohub Control
Launch Videohub Control and click on Settings (the gear icon) and choose "Select Videohub" from
the menu. Click on the Videohub that you wish to control. If you completed the section on customizing
labels, the names you assigned will appear within the software.
If the Input, Output and Remote connections have not yet already been labeled, then the source
pushbuttons will appear simply as "Input", followed by their respective numbers. Likewise, the destination
pushbuttons will appear as "Output", followed by their respective numbers. These inputs and outputs
correspond to the connector numbers on the Videohub.
Getting to Know the Interface
Resizing the Interface
Click and drag the bottom right hand corner to proportionally resize the interface to best fit your screen
size. Alternatively, drag a window edge to resize either vertically or horizontally.
Resizing the Sources and Destinations Areas
Drag the Divider Bar up and down and use the Scroll Bars to scroll the respective areas.
Switching Views
You can switch between pushbutton view and list view by clicking the icons in the bottom right corner.
Using the Dynamic Search
Both the Sources and Destinations areas contain a search icon, which allows you to search for text
dynamically. This is useful if you have many pushbuttons and quickly want to locate a pushbutton with a
specific name. Begin by typing the name you wish to search for. As you type each letter, the pushbuttons
that are displayed will be dynamically filtered.
The word "ATEM" is entered into the Destinations Search Box
and the filtered results are displayed.
Click on the "Select Videohub" button and then select the
Videohub you wish to control.
Controlling Videohub with Software
To Next Page
Loading...
Need help?
General
