Böhnke + Partner bp308 - C Setup Menu Quick Reference

| | - Execute
| |
| +- Doors
| | |
| | +- Door settings
| | | * Door count
| | | 1..3 [1]
| | | * Operating mode
| | | - Selective [Default]
| | | - Selective, alternate locked
| | | - simultaneous (not selective)
| | |
| | +- Door table
| | | * Door table 1..127
| | | * Second door table (signal 80) 1..127
| | | * Third door table (signal 380) 1..127
| | |
| | +- Door A settings
| | | * Landing door type
| | | - Automatically operated [Default]
| | | - Manually operated
| | | * Car door type
| | | - Automatic door (parallel) [Default]
| | | - Automatic door (CANopen)
| | | - none
| | | - Door simulation
| | | - Manually operated
| | | * Door open limit
| | | - off [Default]
| | | - on
| | | * Door close limit
| | | - off [Default]
| | | - on
| | | * Door close button enabled on limit switch
| | | - off
| | | - on [Default]
| | | * Door motor at open limit switch
| | | - off [Default]
| | | - on
| | | * Door motor at close limit switch
| | | - off [Default]
| | | - on
| | | * Safety light curtains
| | | - off [Default]
| | | - on
| | | * Retiring cam
| | | - off [Default]
| | | - on
| | | * Door A enabling (435)
| | | - off [Default]
| | | - on
| | | * Door close sig. on, if Ins/Ero
| | | - off [Default]
| | | - on
| | |
| | +- Door B settings
| | | * Landing door type
| | | - Automatically operated [Default]
| | | - Manually operated
| | | * Car door type
| | | - Automatic door (parallel) [Default]
| | | - Automatic door (CANopen)
| | | - none
| | | - Door simulation
| | | - Manually operated
| | | * Door open limit
| | | - off [Default]
| | | - on
| | | * Door close limit
| | | - off [Default]
| | | - on
| | | * Door close button enabled on limit switch
| | | - off
| | | - on [Default]
| | | * Door motor at open limit switch
| | | - off [Default]
| | | - on
| | | * Door motor at close limit switch
| | | - off [Default]
| | | - on
137