13-1
Bosch Security Systems 05/10 BLCC100I
SE CT IO N 1 3
Panel Solution 16
plus
(Part Number CC100B)
Voltage Input 16-18V A.C. 50-60Hz - 24VA External Power Adaptor or
220-240V A.C. to 18V A.C. 50-60Hz - 24VA Internal Transformer (Primary Power Source)
Continuous Power 1 Amp MAX ( Combined power drawn from Accessory Power(+12V) LAN Power (Module LAN +)
and Output Power (C+) terminals must not exceed 1 amp)
Alarm Power 4 Amp (Total with Primary and Secondary Power Sources Fitted)
Stand-by Battery 12 VDC, 7.2AH sealed rechargeable battery - Panasonic LC-P127R2P or equivalent.
(Secondary Power Source) Dispose of used batteries according to the instructions.
Min Operating Voltage 10.2 VDC
Battery Charger Pulse by pulse charger. (Note: Charge voltage can’t be measured unless battery is tted.)
Module Connection Max total LAN length using multi strand security cable = 300m ,
Telephone Connections RJ-12 Socket or 4-way terminal
Temperature 0˚ to 55˚ C
Enclosure Fixing Method MW700B - Small Enclosure
Use appropriate fasteners capable of handling a minimum of 6kg to x the cabinet against a
sturdy surface using the mounting holes provided.
MW710B - Large Enclosure
Use appropriate fasteners capable of handling a minimum of 12kg to x the cabinet against a
sturdy surface using the mounting holes provided.
Relative Humidity 5 to 85% non-condensing.
Compatible Keypads CP100B - Graphic Keypad (Wh)
CP101B - Graphic Keypad With Prox (Wh)
CP110B - Graphic Keypad (Bk)
CP111B - Graphic Keypad With Prox (Bk)
Compatible Accessories CM104B - 8/16 Zone Expander
CM105B - 16/32 Zone Expander
CM106B - Piggyback Expander
CM110B - 4 Way Relay Output Module
CM120B - 1-Amp LAN Power Supply
SW500B - Solution Link (RAS) Software
CM900 - Direct Link Interface
MW710B - Large Enclosure
CM101B - Voice Interface Module
CM195 - Multi RF Receiver Interface
Enclosure Dimensions: P/N: MW700B - (W)320, (H)260, (D)75mm
P/N: MW710B - (W)320, (H)520, (D)75mm
PWA Dimensions: (W) 235, (H) 85, (D) 40mm
Warranty: 3 years from date of manufacture (return to base)
The following parts are supplied with the panel
Panel Assembly Includes 1 x MW700B Metal Enclosure + Tamper
1 x Panel PWA
1 x User Manual
1 x Installer Reference Guide
1 x Resistor Pack
Resistor Pack Includes 1 x Red Battery Lead
1 x Black Battery Lead
1 x 2-Way Shunt With Handle
2 x Phillips Pan Head Zinc Plated Screws
1 x Telephone Cable RJ12 6P/4C
1 x Pack PCB Mounting Clips (5 pc/pack)
10 x 3K3 – 0.25W +/- 1% Metal Film Resistors
10 x 6K8 – 0.25W +/- 1% Metal Film Resistors
1 x 3-Way Removable Terminal Block
1 x Panel Tamper Switch + Tamper Lead
1 x Tamper Switch Bracket
1 x Product Identication Label
To Next Page
Loading...
