Bosch Solution 16plus Installation Manual

9-3
Bosch Security Systems 05/10 BLCC100I
Solution 16
plus
 Installation Manual  Comms Programming
account number and pass code (PIN) to access the telephone
line exchange when using a pre-paid telephone account (e.g.
Telstra Communic8 Pre-Paid Home account), or when a number
followed by a pause is required to get an outside line on a PABX
system.
The number prex is global for all telephone numbers
programmed in both Destination 1 and Destination 2 (including
the domestic telephone numbers and call forward sequences).
the prex will be dialled immediately before the number.
1) Enter [MENU] + [5] + [1] + [0]. The keypad will display the
current Telco Number Prex.
Number Prefix P001
Press  0-9 OK to SAVE
2) Using the numeric keys, enter all the digits of the telephone
number prex. You can change a single digit by scrolling the
cursor left or right. For special characters including, pause, *
or #, use the up and down arrow keys.
3) Press [OK] to save and exit or press [MENU] to exit without
saving.
Comms > Telephone Number >
Primary Dest 1

MENU 5-1-1
1 Digits 32
This menu sets the primary telephone number for Report
Destination 1. This will typically be the primary base station
receiver number.
1) Enter [MENU] + [5] + [1] + [1]. The keypad will display the
current Primary Telephone Number for Destination 1.
Primary Dest 1 P001
Press  0-9 OK to SAVE
2) Using the numeric keys, enter all the digits of the telephone
number. You can change a single digit by scrolling the cursor
left or right. For special characters including, pause, * or #, use
the up and down arrow keys.
3) Press [OK] to save and exit or press [MENU] to exit without
saving.
Comms > Telephone Number >
Secondary Dest 1

MENU 5-1-2
1 Digits 32
This menu sets the secondary telephone number for Destination
1. This will typically be the secondary base station receiver
number.
1) Enter [MENU] + [5] + [1] + [2]. The keypad will display the
current Secondary Telephone Number for Destination 1.
Secondary Dest 1 P001
Press  0-9 OK to SAVE
2) Using the numeric keys, enter all the digits of the telephone
number. You can change a single digit by scrolling the cursor
left or right. For special characters including, pause, * or #, use
the up and down arrow keys.
3) Press [OK] to save and exit or press [MENU] to exit without
saving.
Comms > Telephone Number >
Primary Dest 2

MENU 5-1-3
1 Digits 32
This menu sets the primary telephone number for destination
2. This location will typically be required when the panel is
congured for dual reporting.
1) Enter [MENU] + [5] + [1] + [3]. The keypad will display the
current Primary Telephone Number for Destination 2.
Primary Dest 2 P001
Press  0-9 OK to SAVE
2) Using the numeric keys, enter all the digits of the telephone
number. You can change a single digit by scrolling the cursor
left or right. For special characters including, pause, * or #, use
the up and down arrow keys.
3) Press [OK] to save and exit or press [MENU] to exit without
saving.
Comms > Telephone Number >
Secondary Dest 2

MENU 5-1-4
1 Digits 32
This menu sets the secondary telephone number for Destination
2. This location will typically be required when the panel is
congured for dual reporting.
1) Enter [MENU] + [5] + [1] + [4]. The keypad will display the
current Secondary Telephone Number for Destination 2.
Secondary Dest 2 P001
Press  0-9 OK to SAVE

Bosch Solution 16plus Specifications

General

Brand	Bosch
Model	Solution 16plus
Category	Security System
Language	English