4-6
Bosch Security Systems 05/10 BLCC100I
Solution 16
plus
Installation Manual Programming Overview
MEN U R EFE REN CE TAB L E
The Solution Controller includes a simple text menu system which makes all levels of programming extremely easy. Once a valid
PIN has been entered followed by the MENU key, the system will automatically determine which menus and options the PIN holder
has access to and only those items will be displayed.
There are four basic grouping levels used. Throughout the manual, symbols have been placed near each menu option so that you
can easily relate the authority level which is required to access them.
A =
= All (No PIN Required)
U =
= User PIN Has Access
M =
= Master PIN Has Access
I =
= Installer PIN Has Access
The following table lists all programming menus and the authority level required to access them.
2-0-1 Turn Area On/O
2-0-2 Turn All Areas On 1-0-0 Erase User 2-0-0 Area Status
2-0-3 Turn All Areas O 2-0-1 Turn Area On/O
2-0-4 Move To Area 2-0-2 Turn All Areas On
2-0-5 Chime On/O 1-1-0 Change Own PIN 2-0-3 Turn All Areas O
1-1-0 Change Own PIN 1-1-1 Change Other PIN 2-0-4 Move To Area
3-0-0 Zone Status 1-1-2 Add PIN 2-0-5 Chime On/O
4-0-0 Output Status 1-1-3 Delete PIN 2-0-6 Chime Mode
4-0-1 Turn Output On/O 1-1-4 View PIN
7-1-0 Set Date & Time
3-0-5 Smoke Sensor Reset 2-1-0 Area Name
3-9-0 Walk Test All Zones 1-2-0 Add Token 2-1-1 General Options
4-9-0 External Siren Test 1-2-1 Delete Token 2-1-2 Input Options
4-9-1 Internal Siren Test 1-2-2 Token Status 2-1-3 Output Options
4-9-2 Strobe Test 2-1-4 Reporting Options
5-0-0 Set Domestic Number 2-1-5 Strobe Trigger
5-0-1 Call/Answer RAS 1-3-0 Add Keyfob
7-9-1 Battery Test 1-3-1 Delete Keyfob
5-9-0 Test Dialler 1-3-2 Test Keyfob 2-2-0 Account Dest 1
7-0-8 Service Mode 2-2-1 Account Dest 2
About 2-2-2 Open Close Route
1-4-0 User Name
1-4-1 Area Assignment
1-4-2 User Options 2-9-0 Area Watch
1-4-4 Timer Group 2-9-1 User Test Interval
1-4-5 Access Assignment 2-9-2 Service Interval
2-9-3 Test Options
1-5-0 PIN Length
1-5-1 PIN Retry Count
1-5-2 Installer PIN
1-5-3 PIN Expire Time
1-6-0 Name
1-6-1 Area Assignment
1-6-2 Access Group
1-6-3 Reader Options