Boschert CU - PROFI - Weights; Punching Force; Power Rating; Workplace

29
Tel.: + 49 / 07621 / 95 93 0
Fax: + 49 / 07621 / 55 184
infoak@boschert.de
www.boschert.de
Mattenstrasse 1
79541 Lörrach-Hauingen
BOSCHERT
Version: 05 / 2011Changes reserved
Technical data
2.2.2 Weights
2.4 Power rating
2.5 Workplace
The workplace which can be occupied by the operating personnel is in front of
the light barrier.
Machine: 3300 Kg
Switch cabinet: 65 Kg
Hydraulic unit: 220 Kg
2.3 Punching force
400 kN
CU-PROFI with standard hydraulic:
power supply: 18 kVA,
cross section for connection: 5 x 2,5 mm
2
,
time-lag main fuse: 20 A.
2.6 Air supply
Amount of compressed air required
Approx. 10 litres / minute (at 6 bar).
We recommend the usage of an air-dryer.
CU-PROFI with fast hydraulic:
power supply: 25 kVA,
cross section for connection: 5 x 6 mm
2
,
time-lag main fuse: 35 A.