EasyManua.ls Logo

Boschert CU - PROFI - Transport of the Machine; Transport Using a Crane

Boschert CU - PROFI
139 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BOSCHERT
35
Tel.: + 49 / 07621 / 95 93 0
Fax: + 49 / 07621 / 55 184
infoak@boschert.de
www.boschert.de
Mattenstrasse 1
79541 Lörrach-Hauingen
Version: 05 / 2011Changes reserved
Transport and assembly
4.6 Transport of the machine
4.6.1 Transport using a crane
- Use only lifts and load take-up equipment with
sufficient load-bearing capacity (weight: see chapter
„Technical data“, section 2).
- It is forbidden to stay below suspended loads.
Life is absolutely in danger in case of failing
loads. Furthermore, this may result in total
loss of the machine!
Procedure:
* hang up ropes and chain hooks as shown in the
drawing,
* lift the machine cautiously,
* when the machine is suspended safely and
horizontally, move it to the intended location by means
of a load crane or heavy-load rolls.
Danger
The forwarding company, the
insurance company and the
Boschert company must immediately
be notified in writing about any
damages in transit.
Information
Prior to final lowering of the machine check that the connection cables of the
operator controls are not below the machine.

Table of Contents

Related product manuals