Boschert CU - PROFI - Preparation of the Machine for Cutting; Providing a Cutting Tool; Insert the die; Insert the Cutting Punch

68
Tel.: + 49 / 07621 / 95 93 0
Fax: + 49 / 07621 / 55 184
infoak@boschert.de
www.boschert.de
Mattenstrasse 1
79541 Lörrach-Hauingen
Version: 05 / 2011Changes reserved
Commissioning
the machine
6.4.1 Providing a cutting tool
6.4 Preparation of the machine for cutting
6.4.3 Insert the cutting punch
6.4.2 Insert the die
- Insert the die into the die holder
- and fasten it by means of the straight pin.
- Insert the punch for cutting.
die
punch for cutting