What to do if Brady M210 screen freezes?
If your Brady Label Maker screen freezes, it could be due to a user interface error. First, try pressing the Power button to turn the printer off. If that doesn't work, remove the AC adapter (if you're using one), then remove the battery pack or batteries, and immediately re-insert them. Finally, power the printer back on.
How to fix a Brady M210 Label Maker when it's jammed and won't feed labels?
If your Brady Label Maker is jammed, it's likely due to a blocked label exit chute causing label material to back up inside the printer. Here’s how to clear the jam: * Slide the locking lever to the unlock position (you might need to force it if there's a large jam). * Remove the cartridge. * Use tweezers or needle-nose pliers to carefully clear the label jam. Be careful not to damage the print head.
Safety precautions and warnings related to battery usage and handling.
Step-by-step instructions for removing and installing label cartridges.
Troubleshooting common hardware issues with the printer.
Steps to resolve issues where the printer screen freezes.
How to fix print quality issues like void areas or lines on text.
Instructions for cleaning internal components like the print head and platen roller.
General| Product color | Black, Yellow |
|---|---|
| Internal memory | 16 MB |
| Built-in barcodes | Code 39, Data Matrix, QR Code |
| Color | No |
| Print technology | Thermal transfer |
| Maximum resolution | 203 x 203 DPI |
| Maximum printing width | 16 mm |
| Battery type | Built-in battery |
| AC input voltage | 110 - 240 V |
| Maximum label width | 19.05 mm |
| USB port | - |
| Connectivity technology | Wireless |
Weight and Dimensions| Depth | 63 mm |
|---|---|
| Width | 114 mm |
| Height | 241 mm |
| Weight | 750 g |
To Next Page
