BRAILLO
l
B 650 SF
5
TABLE OF CONTENTS
1. PRINTER BASICS ....................................................... 8
2. INSTALLATION ........................................................ 11
2.1 Unpacking ......................................................... 12
2.2 Removing the Printer cover ........................................... 13
2.3 Removing the transport locks .......................................... 15
2.4 Paper roll feeder - assembly ........................................... 16
2.5 Compressed air ..................................................... 18
2.6 Connecting the compressed air ........................................ 19
2.7 Connecting the units together .......................................... 20
2.8 Connecting the Printer to the mains and computer .......................... 22
2.9 Placing the units .................................................... 24
2.10 Aligning the Staple and Fold with the Printer ............................. 25
2.11 Adjusting the Staple and Fold unit sideways .............................. 26
2.12 Adjust to paper width, inserting paper ................................... 27
2.13 Printing with the B650 SF............................................. 30
3. OPERATING THE PRINTER ............................................. 33
3.1 Operating panels .................................................... 33
3.2 Functions Printer operating panel ...................................... 34
3.3 Overview of menu structure ........................................... 38
3.4 Explanation of the different menu choices ................................ 39
3.5 Messages/Error messages on the Printer operator panel ..................... 47
3.6 Test print .......................................................... 51
3.7 Functions Staple and Fold operating panel ............................... 52
3.8 Messages in the Staple and Fold display ................................. 56
3.9 Signal tower ....................................................... 57
4. SERVICE AND MAINTENANCE .......................................... 58
4.1 Printing principle.................................................... 58
4.2 Troubleshooting, incorrect Braille ...................................... 64
4.3 Magnet rack - Removal............................................... 69
4.4 Magnet rack - Disassembly, step by step ................................. 70
4.5 Magnet - Replacement ............................................... 72
4.6 Magnet rack - Cleaning............................................... 75
4.7 Magnet rack - Adjustment............................................. 76
4.8 Magnet rack - Refitting and adjusting.................................... 78
4.9 Beam and paper shoes - Overview ...................................... 84
4.10 Beam and paper shoes - Removal and refitting............................. 85
4.11 Beam - Replacement of short pivot arm .................................. 87
4.12 Beam - Replacement of printing pins .................................... 88
4.13 Return spring - Adjustment ............................................ 89
4.14 Eccentrics adjustment - Belt tension ..................................... 90
4.15 Beam wheel sensor - Adjustment ....................................... 91
4.16 Paper shoes - Adjustment ............................................. 92
4.17 Inductive sensors - Adjustment ......................................... 93
4.18 Paper sensor - Replacing.............................................. 94
4.19 Maintenance ....................................................... 95
To Next Page
Loading...