BRAILLO
l
B 650 SF
75
4.6 Magnet rack - Cleaning
Remove the magnet rack as described in chapter 4.3 “Magnet rack, removal”.
Then disassemble the magnet rack as described in chapter 4.4 “Magnet rack disassembly, step by step”.
Now damp an cloth with denatured alcohol to wipe off the surfaces as described in the gure below:
Magnet poles on
the magnets
The support list
The iron pieces in
the long pivot arms
At the back of the long
pivot arms
Note! Never oil, grease or lubricate any of the moving parts on a magnet rack!
To Next Page
Loading...