Braillo 650 SF - Page 55

BRAILLO
l
B 650 SF
55
Note! For advanced users only!
- Sheet mover
Shows the current position for the vacuum arm.
- Homing
Used together with ‘Activate setup’ and will set the servo reference position to zero on the vacuum
arm’s current position.
- Jog speed
The speed the servo will use when pressing the ‘Jog REV’ and ‘Jog FWD’ buttons.
- Save
Used for intial servo setup.
- Activate setup
Enables the function for setting a new referance position by using the ‘Homing’ button.
- Reset AL
Resets an eventually alarm from the servo amplier.
Red light means there is an alarm in the system. See the error display below for the error code.
- W
Displays eventually warning codes from the servo amplier.
- Err
Displays eventually error codes from the servo amplier.
- Servo
Turns the servo motor and amplier on or off.
- Prev
Returns to the Setup menu.
- Jog REV
Runs the vacuum arm manually backwards.
- Jog FWD
Runs the vacuum arm manually forwards.