Brainboxes ED-549 - Aan(Data)

Ethernet Analogue DIO
Product Manual V1.2
© Copyright Brainboxes Ltd
Page 62 of 100
#aan(Data)
Applies to: ED-560
Description:
Command to set the output value of channel n.
Command Syntax:
~aa3n[CS](CR)
#
Delimiter character
aa
Address of the device to be configured, in hexadecimal format (00 to FF)
n
The channel to be read (0 to F)
(Value)
The value for channel n to be set to
[CS]
Checksum
(CR)
Carriage Return
Response:
Valid Command: >[CS](CR)
Invalid Command: ?aa[CS](CR)
>
Delimiter for a valid command
?
Delimiter for an invalid command
[CS]
Checksum
(CR)
Carriage Return