Brainboxes ED-549 - Aam0

Ethernet Analogue DIO
Product Manual V1.2
© Copyright Brainboxes Ltd
Page 78 of 100
$aaM0
Applies to: All analogue input/output products
Description:
Command to read the device model
Command Syntax:
$aaM0[CS](CR)
$
Delimiter character
aa
Address of the device in hexadecimal format (00 to FF)
M0
Command to read the device’s model
[CS]
Checksum
(CR)
Carriage Return
Response:
Valid Command: !aa(Data)[CS](CR)
Invalid Command:?aa[CS](CR)
!
Delimiter for a valid command
?
Delimiter for an invalid command
aa
Address of the responding device
(Data)
Model of the device
[CS]
Checksum
(CR)
Carriage Return
Examples:
Reads the device model. Command sent to the ED-549 and a valid response is returned with the device’s
model, ED-549.
Command: $01M0(CR)
Response: !01ED-549(CR)