Brainboxes ED-549 - Aao(Name)

Ethernet Analogue DIO
Product Manual V1.2
© Copyright Brainboxes Ltd
Page 85 of 100
~aaO(Name)
Description:
Command to set the name of the device.
Command Syntax:
~aaO(Name)[CS](CR)
~
Delimiter character
aa
Address of the device to be configured in hexadecimal format (00 to FF)
O
Command to set the name of the device
(Name)
New device name (10 characters max)
[CS]
Checksum
(CR)
Carriage Return
Response:
Valid Command: !aa[CS](CR)
Invalid Command: ?aa[CS](CR)
!
Delimiter for a valid command
?
Delimiter for an invalid command
aa
Address of the responding device
[CS]
Checksum
(CR)
Carriage Return
Examples:
Set the name of the device to 549Device.
Command: ~01O549Device(CR)
Response: !01(CR)