Brainboxes ED-549 - Aa8 Ci

Ethernet Analogue DIO
Product Manual V1.2
© Copyright Brainboxes Ltd
Page 70 of 100
$aa8Ci
Applies to: ED-549
Description:
Command to read the full scale range configuration for the specified channel.
Command Syntax:
$aa8Ci[CS](CR)
$
Delimiter character
aa
Address of the device in hexadecimal format (00 to FF)
8
Command to read channel range configuration
Ci
Command to specify the channel to read where i is the input channel
[CS]
Checksum
(CR)
Carriage Return
Response:
Valid Command: !aaCiRrr[CS](CR)
Invalid Command: ?aa[CS](CR)
!
Delimiter for a valid command
?
Delimiter for an invalid command
aa
Address of the device which responded
C
Channel read command
i
Specifies the channel that the data was read from where i is the channel
R
Type code command
rr
Type code data from the specified channel where rr is the type code from the ‘Range settings and
data formats’ table
[CS]
Checksum
(CR)
Carriage Return
Examples:
Read the range configuration of the first channel
Command: $018C0(CR)
Response: !01C0R09(CR)
Read the range configuration of the fourth channel
Command: $018C3(CR)
Response: !01C3R0B(CR)