Brainboxes ED-549 - Aas0

Ethernet Analogue DIO
Product Manual V1.2
© Copyright Brainboxes Ltd
Page 81 of 100
$aaS0
Description:
Command to perform internal calibration on the device.
Command Syntax:
$aaS0[CS](CR)
$
Delimiter character
aa
Address of the device to be calibrated
S0
Command to perform internal calibration
[CS]
Checksum
(CR)
Carriage Return
Response:
Valid Command: !aa[CS](CR)
Invalid Command:?aa[CS](CR)
!
Delimiter for a valid command
?
Delimiter for an invalid command
aa
Address of the responding device
[CS]
Checksum
(CR)
Carriage Return
Examples:
Send a command to perform internal calibration of the device and valid response is returned.
Command: $01S0(CR)
Response: !01(CR)
Note: There is no response from the device in three circumstances. If the command syntax is incorrect, there is
a communication error or if no device with the address in the command can be found.