Brainboxes ED-549 - Aal(Location)

Ethernet Analogue DIO
Product Manual V1.2
© Copyright Brainboxes Ltd
Page 84 of 100
~aaL(Location)
Description:
Command to set the device location.
Command Syntax:
~aaL(Location)[CS](CR)
~
Delimiter character
aa
Address of the device to be configured in hexadecimal format (00 to FF)
L
Command to set the location of the device
(Location)
New device location (10 characters max)
[CS]
Checksum
(CR)
Carriage Return
Response:
Valid Command: !aa[CS](CR)
Invalid Command: ?aa[CS](CR)
!
Delimiter for a valid command
?
Delimiter for an invalid command
aa
Address of the responding device
[CS]
Checksum
(CR)
Carriage Return
Examples:
Send command to set the device location.
Command: ~01LRoom1(CR)
Response: !01(CR)