Brainboxes ED-549 - Aa1

Ethernet Analogue DIO
Product Manual V1.2
© Copyright Brainboxes Ltd
Page 88 of 100
~aa1
Applies to: All analogue input/output products
Description:
Command to reset the watchdog timeout status of the device.
Command Syntax:
~aa1[CS](CR)
~
Delimiter character
aa
Address of the device in hexadecimal format (00 to FF)
1
Command to reset the watchdog timeout status
[CS]
Checksum
(CR)
Carriage Return
Response:
Valid Command: !aa[CS](CR)
Invalid Command: ?aa[CS](CR)
!
Delimiter for a valid command
?
Delimiter for an invalid command
aa
Address of the device
[CS]
Checksum
(CR)
Carriage Return
Examples:
Send command to reset the watchdog status and return valid response.
Command: ~011(CR)
Response: !01(CR)