Brainboxes ED-549 - Aaf

Ethernet Analogue DIO
Product Manual V1.2
© Copyright Brainboxes Ltd
Page 76 of 100
$aaF
Applies to: All analogue input/output products
Description:
Command to read the firmware version on the device
Command Syntax:
$aaF[CS](CR)
$
Delimiter character
aa
Address of the device in hexadecimal format (00 to FF)
F
Command to read the firmware version
[CS]
Checksum
(CR)
Carriage Return
Response:
Valid Command: !aa(Data)[CS](CR)
Invalid Command: ?aa[CS](CR)
!
Delimiter for a valid command
?
Delimiter for an invalid command
aa
Address of the device which responded
(Data)
Firmware version of the responding device.
[CS]
Checksum
(CR)
Carriage Return
Examples:
Reads the firmware version of the device and shows it as version 3.65.
Command: $01F(CR)
Response: !013.65(CR)