3.4 Turning Off Kick 2
Loss of Data
Unplug mains power only after Kick 2 has fully shut down. Failure to follow the shutdown
procedure prior to disconnecting power may result in irreversible loss of data.
How to Reset
Step
To reset Kick 2 (if it has frozen or has not completely shut down) press the power button for four
seconds, until it turns off.
Wait 10 seconds, then press the power button again to restart.
Waiting Periods
When disconnecting Kick 2 from line voltage, wait at least 10 seconds before reconnecting it.
Do not turn off Kick 2 during boot-up. Otherwise, configuration files and other data on hard disk
may be damaged or lost.
Emergency
In case of emergency only, unplug detachable mains power cable to simultaneously disconnect all
supply poles.
How to Shut Down
Step
1. Shut down Kick 2 using the software or by pressing power button briefly.
2. When the power LED turns off, unplug and secure all cables and storage devices.
Unplug mains power before connecting or disconnecting other cables.
The power button does not disconnect the device from mains voltage. Unplug mains power cable
to ensure complete voltage disconnection.
Turning Off Kick 2
34 System and Technical User Guide Rev. 1.3 Kick 2 Navigation Station
To Next Page
Loading...