8.3 Malfunctions and Return Instructions
System Damage or Failure
Do not continue to use the system if:
• The mains power cable or plug is damaged or frayed
• Liquid has been spilled into the device
• The system does not operate normally when operating instructions are followed
• A cart has tipped over or cover has been damaged
• System components exhibit a distinct decrease in performance, indicating need for servicing
• Liquids leak from system
• System emits smoke
If an error message appears on the touchscreen, contact Brainlab support. Do not use the
system.
How to Respond to Damage or Failure
Step
1. Turn off system.
2. Unplug system from wall outlet.
3. Contact Brainlab support.
4. Attach a notice such as “DO NOT USE” to equipment to prevent it from being used inad-
vertently.
If you continue to use equipment that has been found to be defective during an inspection, you
risk causing injury to the patient.
MAINTENANCE
System and Technical User Guide Rev. 1.3 Kick 2 Navigation Station 97
To Next Page
Loading...