Brainlab KICK 2 - Cleaning Transport Cases

To Next Page

To Previous Page

5.3 Cleaning Transport Cases

Illustration

Figure 26

How to Clean the Transport Cases

Step

1. Use clean water to clean the surface.

2. If necessary, use a surface disinfectant to disinfect the surface, following the disinfectant

manufacturer’s recommendations.

NOTE: Use only a moist cloth to clean and disinfect surfaces. Do not allow transport cas-

es to become wet or soaked with disinfectant.

3. Clean and disinfect only the outside surfaces of the transport cases. Do not clean or disin-

fect surfaces on the inside of the cases.

4. Allow the transport cases to fully dry before inserting the system.

NOTE: After drying, surface disinfectants may leave stains.

Cleaning Transport Cases

66 System and Technical User Guide Rev. 1.3 Kick 2 Navigation Station