Brainlab KICK 2 - Touch Current for Medical Electrical Systems

6.4.4 Touch Current for Medical Electrical Systems
General Information
The touch current test for medical electrical systems repeats some of the steps in the standard
equipment leakage current test.
Test Overview
Connect the measurement tip of your measuring device with the conductive part and measure the
leakage current.
Measuring Test Points
Point Tested Measured Value Test
Passed?
Microscope fixation screw
Related Links
6.3.2 Equipment Leakage Current on page 73
Touch Current for Medical Electrical Systems
78 System and Technical User Guide Rev. 1.3 Kick 2 Navigation Station