3.6.3 Tracking Unit
General Information
Connecting a tracking unit to the Monitor Cart creates an ME system according to IEC 60601-1,
and must meet the requirements set out in the standard.
Connect the tracking unit to the Monitor Cart when both devices are powered off.
NOTE: Refer to the tracking unit user guide(s) before connecting it to the Monitor Cart.
How to Connect a Tracking Unit
Step
1. Plug the Ethernet cable to the tracking unit port on the Monitor Cart.
2. Connect the Ethernet cable to the tracking unit.
3. Power devices on.
Tracking Unit
40 System and Technical User Guide Rev. 1.3 Kick 2 Navigation Station
To Next Page
Loading...