Bredal F4 - Setting Spreader Parameters; Downshute Position for Field Spreading; Entering Fertilizer Density

19
Enter the preferred downshute position for eld spreading.
Finish with
or press to go to the next page where it is possible to enter the
downshute position for headland spreading.
Press the eld “Le” or “Right” to change the downshute position for headland spreading.
Enter the preferred downshute position for headland spreading.
Finish with
Remember to enter the downshute position for both le and right sides, if both sides
have to be changed.
> entering density
Press the input eld “Density” to change the value.
Enter the fertilizer’s bulk density.
Finish with